English
Consult Now!
| Quantity: | |
|---|---|
CAMC
The CAMC H7 flat top 6 × 4 right-hand drive concrete mixer truck is a heavy-duty engineering transportation equipment designed for the global infrastructure market. It adopts the mature chassis of Hanma Technology and the professional upper design of Xingma, and is specially designed for right-hand drive countries and regions. It is widely suitable for concrete transportation scenarios such as municipal engineering, real estate development, road and bridge construction, and rural infrastructure. The entire vehicle has undergone millions of kilometers of reliability verification and has been exported in bulk to overseas markets such as Southeast Asia, Africa, and the Middle East. With high attendance rates and low maintenance costs, it has gained recognition from global engineering customers.
The vehicle is equipped with the Hanma Power CM6D18.375 50 inline six cylinder high-pressure common rail diesel engine, with a displacement of 9.84L, a rated power of 276kW (375 horsepower), and a maximum torque of 1750N · m. It can output peak torque at 1200-1300rpm and has strong performance in heavy load starting and climbing. Matched with Hanma 12SDCY1851A 12 speed manual transmission, with dense gears and efficient transmission, suitable for various working conditions such as low-speed heavy loads on construction sites and national highway transitions; The 380L aluminum alloy fuel tank ensures long endurance and meets daily high-frequency transportation tasks.
Adopting a 6 × 4 rear dual drive heavy-duty chassis with a wheelbase of 4100+1350mm, the 7.5T front axle is equipped with an HL300A two-stage reduction rear axle, and the frame section is 310 (8+8) mm, with excellent load-bearing and anti torsion capabilities; Standard 11.00R20 engineering tires, suitable for unpaved and muddy road conditions on construction sites. The right-hand drive layout complies with the traffic regulations of right-hand drive countries such as Thailand, Malaysia, Indonesia, and South Africa, making it convenient to land and go abroad. The overall dimensions of the vehicle are approximately 9850 × 2525 × 3960mm, with a curb weight of approximately 13260kg and a total weight of 25000kg.
Equipped with Xingma professional mixing equipment, the mixing tank is made of high-strength wear-resistant steel plate, the hydraulic drive system is stable and reliable, the forward and reverse switching is smooth, and the mixing uniformity is high; The tail is equipped with an operating platform, ladder, and discharge chute, which can accurately discharge materials from multiple angles with low material residue rate. Equipped with ABS anti lock braking system and four point suspension shock absorption in the cab, it balances construction safety and driving comfort. With the support of CAMC's global after-sales network, it provides highly reliable and low-cost concrete transportation solutions for overseas engineering customers.
1.375 horsepower powerful, worry free heavy-duty climbing
The Hanma CM6D18 inline six cylinder high-pressure common rail diesel engine has a power of 276kW/375 horsepower and a peak torque of 1750N · m. It has outstanding low-speed and high torque characteristics, and can easily handle full load climbing and construction site starting, adapting to various complex engineering road conditions.
2.12 speed gearbox+6 × 4 heavy-duty chassis, with strong load capacity and passability
The Hanma 12 speed manual transmission has dense gears, a 7.5T front axle and HL300A dual speed reduction rear axle, a 310 (8+8) mm high-strength frame, 11.00R20 engineering tires, strong load-bearing capacity, and excellent off-road passability.
3.Xingma professional loading, mixing evenly and unloading thoroughly
The Xingma mixing tank is made of high-strength wear-resistant steel plate, with stable hydraulic drive, smooth forward and reverse rotation, and high uniformity of concrete mixing; Multi angle discharge chute and operation platform at the tail, precise discharge, low residual rate, and improved construction efficiency.
4.Right wheel layout, directly adapted to the global right-hand drive market
Standard right-hand drive layout, compliant with traffic regulations in Southeast Asia, Africa, South Asia and other right-hand drive countries, can be put into operation without modification, shortening the registration and commissioning cycle for overseas customers.
5.Mature and reliable, with low lifecycle costs
The H7 platform has been verified over millions of kilometers, with a low failure rate and convenient maintenance; Diesel power provides convenient global fuel supply, strong universality of accessories, and is paired with CAMC's global after-sales system to ensure high fleet attendance and controllable long-term operating costs.
Customer Review 1 | Southeast Asian Infrastructure Engineering Contractor
“Our construction site has poor road conditions and tight transportation tasks. The H7 mixer truck with 375 horsepower is very powerful when fully loaded. The 12 speed gearbox switches smoothly between the construction site and the national highway. The Star Horse tank is evenly mixed and the discharge is clean. The right-hand drive version is directly registered and has a low failure rate after more than a year of use, which is very worry free. "
Customer Review 2 | African Commercial Hybrid Operations Manager
“The local infrastructure is backward, with high requirements for vehicle reliability. The H7 chassis is sturdy and has good passability. The 380L large fuel tank reduces refueling frequency, and accessories are easily purchased locally. CAMC's after-sales response is timely, and it has become the main model of our mixing fleet. "
Q1: What engine does the CAMC H7 mixer truck use?
A: It is equipped with a CAMC/ Hanma CM6D18.375 inline-6 cylinder high-pressure common rail diesel engine, with 276kW (375HP) rated power and 1750N·m maximum torque.
Q2: What is the driving layout and steering configuration?
A: It adopts a 6×4 heavy-duty chassis with right-hand drive (RHD), suitable for countries and regions with left-side traffic regulations.
Q3: What is the gearbox configuration?
A: It is matched with a CAMC 12-speed manual transmission (model 12SDCY1851A), providing smooth and efficient power delivery for both construction sites and highway transit.
Q4: What are the key chassis specifications?
A: 7.5T front axle, HL300A double-reduction rear axles, 310(8+8)mm high-strength frame, 11.00R20 construction tires, wheelbase 4100+1350mm, and a 380L aluminum alloy fuel tank.
Q5: What is the mixing drum capacity?
A: It is equipped with a Xingma professional mixing drum made of high-strength wear-resistant steel, with stable hydraulic drive, uniform mixing and low residue discharge.
Q6: What are the vehicle dimensions and weight?
A: Overall dimensions are approximately 9850×2525×3960mm, curb weight about 13,260kg, and gross vehicle weight 25,000kg.
Q7: What safety features does it have?
A: It is equipped with ABS anti-lock braking system as standard, four-point suspended cab, and heavy-duty construction tires, ensuring safe operation on complex construction sites.
Q8: What after-sales support does CAMC provide overseas?
A: CAMC offers multilingual technical support, global spare parts supply and on-site maintenance service to ensure high fleet uptime for overseas construction customers.
