CHAdeMO Dual Charging Connector Electric Vehicle Charger

Product Introduction

The CAMC CHAdeMO dual charging connector charger is a high-performance charging solution tailored for high-power and fast charging scenarios. With international certification and core technology advantages, it is widely suitable for high flow charging scenarios such as highway service areas and logistics hubs, especially for CAMC models equipped with 650VDC high-voltage platforms, providing efficient, safe, and intelligent fast charging services for electric vehicles and helping charging scenarios operate efficiently.

The device adopts a three-phase five wire system (L1/L2/L3/N/PE) input design, which separates the protective grounding from the working neutral line, effectively preventing electric shock and lightning strikes, reducing electromagnetic interference, ensuring the safety of equipment and personnel, complying with international electrical standards, supporting 400VAC ± 15% wide voltage input and 50/60Hz dual frequency adaptive, adaptable to different regional power grid environments, and avoiding damage to equipment and vehicles caused by voltage fluctuations. It has an output power of up to 300kW and adopts a 150kW × 2 constant power mode. Its core advantage lies in its excellent dual gun collaborative output capability, with a single gun current of up to 200A and a total dual gun current of 400A. It is compatible with the CAMC 650VDC high-voltage platform and has a 40% increase in charging efficiency compared to traditional chargers, significantly reducing vehicle charging time and improving charging scene turnover efficiency.

The device integrates nine layers of security protection mechanisms, covering multiple protections such as leakage, lightning protection, overvoltage, short circuit, electronic lock, etc., to comprehensively ensure the safety of the entire charging process; It can work stably in a wide temperature range of -30 ℃~75 ℃, coupled with a compact heat dissipation design, effectively solving the problem of high-power charging heat dissipation and ensuring continuous and stable operation of the equipment. At the same time, it is equipped with intelligent power allocation technology, which can dynamically adjust the output power of the dual guns according to the charging needs of the vehicle, realizing the rational utilization of resources. It is also equipped with standard anti-theft alarm and remote monitoring interfaces, making it easy for operators to monitor the real-time operation status of the equipment, troubleshoot faults, and reduce operational management costs.

This device has passed CHAdeMO 3.0 international certification and meets international standards in terms of technical compatibility and safety performance. It can be smoothly integrated with relevant car models around the world, and with the advantages of efficient fast charging, intelligent convenience, safety and reliability, it has become an ideal choice for high flow charging scenarios, providing high-quality solutions for fast charging of electric vehicles.

Essential Details

Core Product Highlights

1. Efficient and fast charging, strong synergy: With an output power of up to 300kW, it adopts a 150kW × 2 constant power mode and dual gun coordinated output. The single gun current is 200A and the total current of the dual guns is 400A. It is compatible with the CAMC 650VDC high-voltage platform, and the charging efficiency is improved by 40% compared to traditional chargers, greatly reducing charging time and improving scene turnover efficiency.

2. Comprehensive safety and wide adaptability: Integrated nine layer safety protection mechanism, matched with three-phase five wire input design, anti electric shock, lightning protection, anti-interference, in compliance with international electrical standards; Through CHAdeMO 3.0 international certification, it supports 400VAC ± 15% wide voltage, 50/60Hz dual frequency adaptive, and adapts to different global power grid environments.

3. Intelligent and convenient, efficient operation and maintenance: equipped with intelligent power allocation technology, dynamically adjusting the output power of dual guns to achieve rational utilization of resources; Equipped with remote monitoring interface and anti-theft alarm function, it facilitates real-time monitoring of equipment status, troubleshooting, and reduces operational management costs.

4. Stable and durable, with a wide range of scene adaptability: it can work stably in a wide temperature range of -30 ℃~75 ℃, and the compact heat dissipation design solves the problem of high-power charging heat dissipation; Adapting to high traffic scenarios such as highway service areas and logistics hubs, taking into account the operational needs of complex outdoor environments, with outstanding stability.

Excellent Buyer Reviews

1. The person in charge of the operation of a certain highway service area in Europe: “Our service area is a high flow charging scenario, with extremely high requirements for charging efficiency and stability. The CAMC CHAdeMO dual charging connector charger fully meets the needs. With a high power of 300kW and dual gun collaborative output, the charging efficiency is significantly improved compared to traditional equipment. A single gun with a current of 200A can quickly replenish energy for the vehicle, greatly reducing the waiting time for car owners. It has also passed CHAdeMO 3.0 certification and is suitable for various vehicle models. The remote monitoring function also facilitates real-time equipment management. The wide temperature design can operate stably in low temperature environments in winter and high temperature environments in summer, which is very reliable.”

2. Procurement Manager of a large logistics hub in Southeast Asia: “Our hub has a large number of CAMC electric commercial vehicles equipped with 650VDC high-voltage platforms. The dual gun synergy and power advantage of this charger perfectly meet our needs, increasing charging efficiency by 40%, greatly shortening vehicle refueling time, and improving logistics turnover efficiency. The nine layer security protection and three-phase five wire system design give us great peace of mind. The wide voltage input is adapted to the local power grid, and the remote monitoring and anti-theft functions also reduce our operation and maintenance costs. The feedback is very good, and we have already purchased and put it into use in bulk.”

Company Profile

CAMC International Trade Co., Ltd. is the only official global foreign trade platform of Hanma Technology Group, affiliated with Geely Remote New Energy Commercial Vehicle Group, located in Ma'anshan National Economic and Technological Development Zone, Anhui Province. It is a nationally recognized professional export base enterprise for heavy-duty commercial vehicles and power equipment. Relying on the core technology advantages of Geely's alcohol hydrogen electric vehicle, the company has built a three in one technology system of diesel traditional power, pure electric zero emissions, and methanol low-carbon clean energy. At the same time, it has a national enterprise technology center, industrial design center, and professional research platform. All products in the series have undergone millions of kilometers of extreme working conditions verification, and are suitable for complex operating scenarios such as high temperature, high dust, high humidity, and heavy load worldwide. They balance efficient operation and low-carbon compliance, and are in line with the global trend of carbon neutrality development.

The company has created a multi scenario, full category global product matrix, covering five core areas: overseas logistics and transportation, engineering infrastructure, inland shipping, industrial supporting, and new energy replenishment. The whole vehicle end includes the new G2M 6 × 4 methanol tractor, H7E 6 × 4 port zero emission electric tractor, mainline diesel heavy-duty truck, engineering dump truck, concrete mixer truck, and powder material special vehicle; The power end includes 11.81L marine diesel engine and M100 dedicated methanol engine, suitable for multi scenario power matching of vehicles, ships, and generator sets; The industrial supporting system has BDW-FUDA non lubricated swing air compressors, providing high-purity oil-free gas sources for the powder and chemical industries; The new energy package includes 7kW AC charging piles, X series DC charging stations, CHAdeMO dual gun fast charging equipment, and X7M methanol mobile charging vehicles, which can provide a complete set of green energy replenishment solutions for overseas ports and logistics parks. Simultaneously supporting diversified cooperation models such as whole vehicle export, overseas assembly of CKD parts, and matching of original factory components.

All products in the series have complete global compliance qualifications and have passed multiple international authoritative certifications such as ISO quality management system, CCS classification certification, IMO Tier II maritime standards, Euro V, EAC, GCC, etc. We can customize left/right steering vehicle models, battery capacity, methanol anti-corrosion system, power parameters, electronic control and charging interface standards according to different national regulations, road conditions and operating habits, accurately adapting to the localized operational needs of more than 60 countries including Southeast Asia, the Middle East, Africa, Central Asia, Latin America, Eastern Europe, etc.

Adhering to the development concept of precision overseas and green win-win, CAMC International focuses on the global green heavy-duty track, with low-carbon methanol and zero emission pure electric products as the core differentiation advantages, helping overseas customers reduce operation and maintenance costs, achieve compliant operations, and green upgrades. In the future, the company will continue to cultivate global channels, iterate intelligent green equipment, improve localized service ecology, and create an internationally renowned benchmark brand for heavy equipment going global with hardcore Chinese intelligent manufacturing and high-quality global services. It will work together with global partners to build a long-term stable and mutually beneficial new industrial pattern.

FAQ

Q1: What is the CAMC CHAdeMO dual connector charger designed for?

A: The CAMC CHAdeMO dual-port DC charger is a high-efficiency fast charging device specially developed for heavy-duty electric commercial vehicles and new energy fleets. Equipped with dual CHAdeMO charging connectors, it is widely applicable to logistics yards, port terminals, industrial parks and public charging stations, supporting simultaneous fast charging of two electric vehicles to greatly improve fleet charging efficiency.

Q2: What are the core power and charging performance parameters?

A: The charger supports high-power DC fast charging with multiple power grades optional. Adopting intelligent power distribution technology, it can automatically adjust the output power of dual ports according to vehicle charging demands. It efficiently charges CAMC electric tractors and other heavy-duty EVs from 20% to 80% SOC in a short time, minimizing vehicle downtime.

Q3: What vehicle models and markets does it adapt to?

A: Featuring standard CHAdeMO interface, it is fully compatible with electric heavy trucks, commercial vehicles and new energy equipment adopting CHAdeMO protocol, covering mainstream markets in Asia, Europe and other regions. It perfectly matches the charging needs of CAMC H7E series electric tractors and global mainstream fleet EVs.

Q4: What are the advantages of dual CHAdeMO connectors compared with single-port chargers?

A: The dual-connector design realizes simultaneous charging for two vehicles without mutual interference, doubling the daily charging capacity of a single device. It supports intelligent dynamic power allocation, avoiding power waste, effectively reducing equipment investment and site occupation cost for fleet charging stations, and improving overall operational efficiency.

Q5: What safety protection functions does the charger have?

A: It is equipped with comprehensive multi-dimensional safety protection systems, including over-voltage, under-voltage, over-current, short-circuit, electric leakage, over-temperature and lightning surge protection. It supports real-time fault monitoring, automatic power-off protection and charging safety self-check, ensuring stable and safe operation during high-frequency and long-term working cycles.

Q6: Can it adapt to harsh outdoor working environments?

A: Yes. The whole machine adopts industrial-grade waterproof and dustproof design, with excellent environmental adaptability. It operates stably in a wide temperature range, resisting high temperature, humidity, dust and rain erosion, fully meeting the outdoor installation and operation requirements of ports, logistics parks and open-air charging stations.

Q7: Does it support intelligent management and remote monitoring?

A: It supports mainstream open charging protocol, matching cloud platform intelligent management. It realizes remote real-time monitoring of charging status, data statistics, fault early warning and automatic billing. It supports multiple activation methods to facilitate centralized refined management of enterprise fleets and charging stations.

Q8: What customization and after-sales services are available?

A: We support personalized customization of power parameters, appearance logos and communication protocols to meet different regional market and project needs. The device enjoys a standard factory warranty. We provide global spare parts supply, 24/7 online technical support, and overseas on-site installation, commissioning and operation training services.