English
| Quantity: | |
|---|---|
Product Overview
This CAMC 6×4 dump truck is the brand's flagship construction transport vehicle, featuring a striking orange finish and a large-capacity rear-dump cargo bed. It is specifically designed for efficient short-haul transportation of materials such as muck, sand, and building supplies. Built on a mature chassis structure, it balances power and load-bearing performance. With 2026 factory-direct supply ensuring excellent condition, it is a cost-effective equipment for infrastructure and construction site transport scenarios.
Technical Parameters
CAMC TRUCK SPECIFICATION | |
NAME | Dump Truck |
BRAND/SERIES | CAMC / H9 |
CABIN | |
CAMC LHD H9 flat roof with A/C, radio, pneumatic shock absorber, pneumatic seat, blue teeth, mp3, and luxury interior. | |
ENGINE | |
Supplier | CAMC |
Model | CM6D18 375 50 |
Fuel type | Diesel |
Rated power/horsepower（kw/hp） | 276/375 |
Rated speed(rpm) | 1900 |
Displacement (L) | 9.84 |
Emission Standard | Euro 5 |
Cylinders | 6 |
Controller type | Mechanical |
TRANSMISSION | |
Supplier | FAST |
Model | 12JSD180T（PTO） |
Speed ratio | 12 |
CHASSIS | |
Drive type | 6×4 |
Overall dimension (mm) | 8800x2550x3700 |
Wheel base(mm) | 3900+1350 |
Kerb Weight (kg) | 12300 |
Rated GVW/ GVW (kg) | 25000 |
FRAME | |
Size (H*W*T) | Height:310mm，Width:90mm，Thickness:8mm+5mm (Double) |
Front axle | ISUZU technology steering axle with double T-cross section, Rated capacity:7.5T |
Rear axle | Mercedes-Benz technology 16T casting axle , with double reduction and differential locks between axles， Rated capacity:16T |
Ratio:4.769 optional:3.867, 4.267,4.769,5.263 | |
Spring | 9/9/12 |
Tyre | 12.00R20 Steel tire,10+1 pieces |
Operation Guide
1.Pre-Start Inspection：Carefully check whether the tire pressure meets the standard, whether the hydraulic oil level is within the standard range, and confirm that the cargo bed is fully reset without deviation.
2.Driving Precautions：Strictly prohibit overloading. Be sure to slow down when turning or driving on ramps, and keep a safe distance from the vehicle in front.
3.Unloading Operation Process：Park on a flat and solid ground, pull the handbrake tightly → unlock the cargo bed locking device → slowly operate the hydraulic lever to lift the cargo bed → reset the cargo bed after unloading and check again whether the locking state is firm.
4.Daily Maintenance Points：Clean the air filter regularly, inspect the tightness of the hydraulic system pipelines, and replace the engine oil in a timely manner according to the specified mileage.
Product Advantages
1.High Adaptability: 6×4 drive layout + large-capacity cargo bed, suitable for heavy-load transportation of various construction materials, with more stable passage in complex working conditions.
2.Efficient Unloading: Fast-response hydraulic dump system enables smooth unloading process, greatly improving transport turnover efficiency.
3.Durable & Reliable: The body is made of high-strength steel, and key components are reinforced, adapting to high-frequency operation scenarios with longer service life.
4.Controllable Cost: The mature powertrain balances power and fuel economy; factory-direct supply reduces procurement costs; the wide after-sales network ensures convenient maintenance.
Customer Reviews
“Very happy to receive my car. This is a satisfying car buying experience. Jason's service is very good and he responded to my questions in a timely manner. I'm grateful for everything he did.”
--From American carrier
“My machine arrived on time, in perfect condition, and without any issues. The machine is well-made and has operated flawlessly without any problems. My cooperation with Jining China Machinery Co., Ltd. has been very pleasant; they are always quick to respond to any questions I have, and communication is always smooth. I would recommend this supplier/manufacturer to anyone considering purchasing this product, as their product and after-sales support are excellent, and I especially recommend contacting their sales staff.”
--Transporter from Ethiopia
Company Profile
We take quality first as our service tenet. Our product advantages include technical equipment and talents, which is our guarantee to be able to produce top-level trucks. The company has obtained national fuel-saving certification, in the field of fuel engine innovation, breakthrough and improvement.
FAQ
Q: Do you have ISO certificate ?
A:Yes we have, please contact us to get our certificates
Q:How do you control the quality of your product?
A:Our factory has standard production worksho, gets ISO CCC BV certificates, our workers are well trained. Every unit of product undergoes a rigorous inspection process
Q:Besides diesel generator, what other products can buy ?
A:Diesel Truck,Electric Truck,Transmission,Charging Pile,Compressor.
Q:What's the payment?
A:By T/T or L/C at sight
Q:How about the lead time?
A:35 working days
Q:How about the after-sale service?
A:Our main export countries have accepted after-sales service,some countries use the third party service
Q:Why should you buy from us not from other suppliers?
CAMC is the national priority production and research development base of heavy truck, special purpose heavy vehicle and spare parts, which is also the state mainly supports enterprise.
Q:What services can we provide?
A:Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES；
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
Product Overview
This CAMC 6×4 dump truck is the brand's flagship construction transport vehicle, featuring a striking orange finish and a large-capacity rear-dump cargo bed. It is specifically designed for efficient short-haul transportation of materials such as muck, sand, and building supplies. Built on a mature chassis structure, it balances power and load-bearing performance. With 2026 factory-direct supply ensuring excellent condition, it is a cost-effective equipment for infrastructure and construction site transport scenarios.
Technical Parameters
CAMC TRUCK SPECIFICATION | |
NAME | Dump Truck |
BRAND/SERIES | CAMC / H9 |
CABIN | |
CAMC LHD H9 flat roof with A/C, radio, pneumatic shock absorber, pneumatic seat, blue teeth, mp3, and luxury interior. | |
ENGINE | |
Supplier | CAMC |
Model | CM6D18 375 50 |
Fuel type | Diesel |
Rated power/horsepower（kw/hp） | 276/375 |
Rated speed(rpm) | 1900 |
Displacement (L) | 9.84 |
Emission Standard | Euro 5 |
Cylinders | 6 |
Controller type | Mechanical |
TRANSMISSION | |
Supplier | FAST |
Model | 12JSD180T（PTO） |
Speed ratio | 12 |
CHASSIS | |
Drive type | 6×4 |
Overall dimension (mm) | 8800x2550x3700 |
Wheel base(mm) | 3900+1350 |
Kerb Weight (kg) | 12300 |
Rated GVW/ GVW (kg) | 25000 |
FRAME | |
Size (H*W*T) | Height:310mm，Width:90mm，Thickness:8mm+5mm (Double) |
Front axle | ISUZU technology steering axle with double T-cross section, Rated capacity:7.5T |
Rear axle | Mercedes-Benz technology 16T casting axle , with double reduction and differential locks between axles， Rated capacity:16T |
Ratio:4.769 optional:3.867, 4.267,4.769,5.263 | |
Spring | 9/9/12 |
Tyre | 12.00R20 Steel tire,10+1 pieces |
Operation Guide
1.Pre-Start Inspection：Carefully check whether the tire pressure meets the standard, whether the hydraulic oil level is within the standard range, and confirm that the cargo bed is fully reset without deviation.
2.Driving Precautions：Strictly prohibit overloading. Be sure to slow down when turning or driving on ramps, and keep a safe distance from the vehicle in front.
3.Unloading Operation Process：Park on a flat and solid ground, pull the handbrake tightly → unlock the cargo bed locking device → slowly operate the hydraulic lever to lift the cargo bed → reset the cargo bed after unloading and check again whether the locking state is firm.
4.Daily Maintenance Points：Clean the air filter regularly, inspect the tightness of the hydraulic system pipelines, and replace the engine oil in a timely manner according to the specified mileage.
Product Advantages
1.High Adaptability: 6×4 drive layout + large-capacity cargo bed, suitable for heavy-load transportation of various construction materials, with more stable passage in complex working conditions.
2.Efficient Unloading: Fast-response hydraulic dump system enables smooth unloading process, greatly improving transport turnover efficiency.
3.Durable & Reliable: The body is made of high-strength steel, and key components are reinforced, adapting to high-frequency operation scenarios with longer service life.
4.Controllable Cost: The mature powertrain balances power and fuel economy; factory-direct supply reduces procurement costs; the wide after-sales network ensures convenient maintenance.
Customer Reviews
“Very happy to receive my car. This is a satisfying car buying experience. Jason's service is very good and he responded to my questions in a timely manner. I'm grateful for everything he did.”
--From American carrier
“My machine arrived on time, in perfect condition, and without any issues. The machine is well-made and has operated flawlessly without any problems. My cooperation with Jining China Machinery Co., Ltd. has been very pleasant; they are always quick to respond to any questions I have, and communication is always smooth. I would recommend this supplier/manufacturer to anyone considering purchasing this product, as their product and after-sales support are excellent, and I especially recommend contacting their sales staff.”
--Transporter from Ethiopia
Company Profile
We take quality first as our service tenet. Our product advantages include technical equipment and talents, which is our guarantee to be able to produce top-level trucks. The company has obtained national fuel-saving certification, in the field of fuel engine innovation, breakthrough and improvement.
FAQ
Q: Do you have ISO certificate ?
A:Yes we have, please contact us to get our certificates
Q:How do you control the quality of your product?
A:Our factory has standard production worksho, gets ISO CCC BV certificates, our workers are well trained. Every unit of product undergoes a rigorous inspection process
Q:Besides diesel generator, what other products can buy ?
A:Diesel Truck,Electric Truck,Transmission,Charging Pile,Compressor.
Q:What's the payment?
A:By T/T or L/C at sight
Q:How about the lead time?
A:35 working days
Q:How about the after-sale service?
A:Our main export countries have accepted after-sales service,some countries use the third party service
Q:Why should you buy from us not from other suppliers?
CAMC is the national priority production and research development base of heavy truck, special purpose heavy vehicle and spare parts, which is also the state mainly supports enterprise.
Q:What services can we provide?
A:Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES；
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
