BASIC INFO.

PRODUCT DESCRIPTION

1. Product Overview

2. Product Advantages

1. Precise Working Condition Adaptation：The mixing drum speed can be adjusted on demand to meet the transportation requirements of different grades of concrete, and the discharge uniformity is better than traditional models.

2. High Urban Operation Compliance：Zero-emission design meets environmental protection transportation standards in urban core areas, free from the impact of traffic restriction policies.

3. Ultra-Low Operation Noise：The operating noise of the electric drive system is reduced by more than 40% compared with diesel mixers, suitable for engineering operations around residential areas.

4. Controllable Energy Cost：The energy cost per cubic meter of transportation is only 50% of traditional models, with significant long-term operational economy.

3. Operation Guide

1. Pre-Loading Preparation：Start the mixing system, adjust the drum to "feeding mode", and connect concrete only after confirming the drum speed is stable.

2. Transportation Operation：Keep the drum rotating at low speed (2-4r/min) during driving to avoid concrete segregation; switch to power enhancement mode when climbing.

3. Unloading Operation：Adjust the drum to "unloading mode" after arriving at the construction site, adjust the speed according to the construction rhythm, and rinse the inner wall of the drum after unloading.

4. Energy Supply and Parking：Prioritize energy supply after returning to the station; turn off the mixing system during energy supply. After parking, check whether the drum is empty to avoid residual solidification.

4. User Reviews

• Commercial concrete station manager: "This vehicle is not restricted in urban areas, so it can run 2 more trips a day. The mixing uniformity is excellent, and the construction site feedback is good."

• Mixer truck driver: "The noise is much lower. I used to get complaints when driving around residential areas, but now there’s basically no such problem, and it’s lighter to drive than diesel trucks."

• Engineering contractor: "The transportation cost per cubic meter is almost halved. The price difference is earned back in a few months, and it’s very cost-effective for long-term use."

FAQ

1. 1.Q:How to clean residual concrete in the drum?

   A:Rinse the inner wall of the drum with high-pressure water immediately after unloading. For a small amount of residue, add clean water and rotate the drum at low speed (5-8r/min) for cyclic flushing.

2. 
   

3. 2.Q:Can the range cover long-distance transportation?

   A:It adapts to short-distance transfer scenarios within 30 kilometers. For long-distance transportation, it can be connected with intermediate energy supply stations.

4. 
   

5. 3.Q:Will concrete solidify in low-temperature environments?

   A:The drum can be optionally equipped with an insulation layer, which can delay the solidification time of concrete in low-temperature environments. Cooperating with low-speed rotation can ensure transportation quality.