English
| Quantity: | |
|---|---|
The CAMC 8 × 4 diesel dump truck is a heavy-duty engineering transportation solution designed for harsh working conditions. With its powerful power, efficient unloading performance, reliable vehicle quality, and comfortable driving configuration, it is widely suitable for high-intensity and complex construction scenarios such as mining and large-scale infrastructure. It is the preferred equipment for global engineering heavy-duty transportation. The whole vehicle is equipped with a high-power diesel engine with high-pressure common rail technology, with a maximum horsepower of 440hp and a peak torque of 2200N · m. Coupled with a professionally optimized four-wheel drive system, the power reserve is abundant and the passability is extremely strong. It can easily cope with 60% steep slopes and various complex rugged terrains, and is perfectly capable of heavy-duty off-road transportation operations. The vehicle adopts an innovative U-shaped cargo box structure, paired with a high-precision electric hydraulic lifting system. The maximum unloading angle can reach 60 °, and a single complete unloading only takes 25 seconds. Compared with traditional dump trucks, the operational efficiency is improved by 40%, greatly accelerating the project construction progress. The whole vehicle has been reinforced and upgraded through the frame and core key components, with a sturdy and wear-resistant structure, strong resistance to construction, and an average fault free working time of over 3000 hours. It has excellent long-term heavy-duty and high-frequency operation stability, low operation and maintenance costs, and outstanding comprehensive economy. The cab adopts a fully sealed dust-proof design, equipped with air suspension seats and intelligent temperature control system, effectively isolating the influence of construction site dust and high temperature environment, comprehensively improving driving comfort under harsh working conditions, balancing strong operational performance, long-term reliability and humanized driving experience, providing efficient, stable and cost-effective one-stop solutions for global mining, infrastructure and other heavy-duty engineering transportation.
CAMC TRUCK SPECIFICATION | |
NAME | Dump Truck |
BRAND/SERIES | CAMC / Classic(Euro type) |
CABIN | |
CAMC LHD classic flat roof with A/C, radio, Mechanical shock absorber, Mechanical shock seat, blue teeth, mp3, and luxury interior. | |
ENGINE | |
Supplier | CAMC |
Model | CM6D28 420 31 |
Fuel type | Diesel |
Rated power/horsepower（kw/hp） | 309/420 |
Rated speed(rpm) | 1900 |
Displacement (L) | 11.81 |
Emission Standard | Euro 2 |
Cylinders | 6 |
Controller type | Mechanical |
TRANSMISSION | |
Supplier | FAST |
Model | 9JSD200T（Power Take Off） |
Speed ratio | 9 |
CHASSIS | |
Drive type | 8×4 |
Overall dimension (mm) | 10080x2550x3700 |
Wheel base(mm) | 1850+3370+1350 |
Kerb Weight (kg) | 14870 |
Rated GVW/ GVW (kg) | 31000/40000 |
FRAME | |
Size (H*W*T) | Height:310mm，Width:90mm，Thickness:8mm+8mm (Double) |
Front axle | ISUZU technology steering axle with double T-cross section, Rated capacity:7.5T |
Rear axle | Mercedes-Benz technology 16T casting axle , with double reduction and differential locks between axles， Rated capacity:16T |
Ratio:5.263 optional:3.867, 4.267,4.769,5.263 | |
Spring | 9/9/12 |
Tyre | 12R22.5 Vacuum tire,12+1 pieces |
1. Hardcore power output, all terrain strong driving: equipped with a 440 horsepower high-power high-pressure common rail diesel engine, 2200N · m ultra high peak torque, matched with an optimized four-wheel drive system, strong power, outstanding climbing ability, easy to cope with 60% steep slopes and complex construction site terrain, the heavier the load, the better the performance.
2. High speed and efficient unloading, construction efficiency leap: Innovative U-shaped high-strength cargo box with electric hydraulic lifting system, supporting 60 ° large angle unloading, single unloading only takes 25 seconds, and the operating efficiency is 40% higher than traditional models, efficiently adapting to high-frequency continuous construction scenarios.
3. Strengthen the overall quality of the vehicle and achieve ultra long and trouble free operation: The frame and core components are upgraded with targeted reinforcement, and the structure is impact resistant and wear-resistant. The average trouble free working time exceeds 3000 hours, and the stability is fully maintained under harsh working conditions, significantly reducing downtime and maintenance costs.
4. Comfortable driving in all scenarios, suitable for harsh working conditions: The fully sealed cab effectively prevents dust and heat insulation, coupled with air suspension seats and intelligent temperature control system, completely improves the working environment of dusty and high-temperature construction sites, and alleviates driver fatigue from long-term work.
5. Wide adaptability to working conditions, high comprehensive cost-effectiveness: tailor-made for harsh and heavy load scenarios such as mines and large-scale infrastructure, with triple advantages of power, efficiency, and reliability, excellent long-term operational economy, and suitable for various heavy engineering transportation needs worldwide.
1.Pre-Start Inspection：Carefully check whether the tire pressure meets the standard, whether the hydraulic oil level is within the standard range, and confirm that the cargo bed is fully reset without deviation.
2.Driving Precautions：Strictly prohibit overloading. Be sure to slow down when turning or driving on ramps, and keep a safe distance from the vehicle in front.
3.Unloading Operation Process：Park on a flat and solid ground, pull the handbrake tightly → unlock the cargo bed locking device → slowly operate the hydraulic lever to lift the cargo bed → reset the cargo bed after unloading and check again whether the locking state is firm.
4.Daily Maintenance Points：Clean the air filter regularly, inspect the tightness of the hydraulic system pipelines, and replace the engine oil in a timely manner according to the specified mileage.
1. African mining engineering contractor: “The mining construction terrain is complex, with steep slopes and a lot of dust, which requires extremely high power, passability, and durability of the dump truck. The CAMC 8 × 4 diesel dump truck has sufficient 440 horsepower power, 2200N · m torque heavy-duty climbing is easy, 60% steep slope passage is pressure free, and the 25 second high-speed unloading greatly improves our mining transportation efficiency. The vehicle has a solid structure and extremely low failure rate, with a fault free operation capability of over 3000 hours to ensure high-intensity continuous operation. The sealed cab and comfortable configuration also greatly improve the driver's operating experience, making it the main transportation equipment for our mining construction. ”
2. Southeast Asian infrastructure procurement operator: “We undertake large-scale infrastructure projects all year round, with complex construction site conditions and high operational intensity. This 8 × 4 dump truck has excellent comprehensive performance, strong four-wheel drive passability, stable driving in complex terrain, clean and residue free unloading of U-shaped cargo boxes, and much higher operating efficiency than similar models. The whole vehicle is durable and reliable, with low operation and maintenance costs, balancing efficient operation and comfortable driving. It is perfectly adapted to various harsh working conditions such as infrastructure and mining, and has a great advantage in comprehensive cost-effectiveness. ”
CAMC International is a benchmark enterprise in China's heavy vehicle manufacturing industry. As a key national supported research and development production base for heavy vehicles and components, the company has maintained a leading position in the industry since its establishment in the 1970s. With a complete layout of the entire industry chain, CAMC has become the only truck manufacturer in China with the ability to independently produce core components such as engines, transmissions, axles, chassis, and cab, achieving full process autonomy and controllability from key components to the entire vehicle.
The company relies on the research and development strength of the national enterprise technology center, and its products cover a full range of commercial vehicles such as heavy-duty trucks, engineering dump trucks, and special transport vehicles, which are widely used in key areas of the national economy such as infrastructure, mining, and logistics. Through continuous technological innovation and intelligent manufacturing upgrading, CAMC not only maintains a leading position in the domestic market, but also sells its products to more than 80 countries and regions around the world, especially in the markets along the "the Belt and Road". As a representative enterprise of high-end equipment manufacturing in China, the company is actively promoting the application of new energy and intelligent technology in the commercial vehicle field, leading the industry to transform and upgrade towards green and low-carbon direction.
Q:How about the warranty?
A:1 year or 100000km, whichever comes first
Q: Do you have ISO certificate?
A: Yes, we have. Please contact us to get our certificates.
Q: How many units of truck does your factory produce per year?
A: Almost 100000 units. Nearly 8500 units per month.
Q: How do you control the quality of product?
A: Our Factory has standard production workshop and gets ISO CCC BV certificates. Our workers are well trained. Every unit of product undergoes a rigorous inspection process.
Q: How about your product after-sales service system?
A: Our main export countries have accepted after-sales service, some countries use the third party service.
Q: Do you accept custom order? What's is your MOQ order?
A:Yes, we do. Our MOQ is 1 unit.
Q: What's the payment terms?
A: By T/T or L/C at sight.
Q: How about shipment?
A: 20FT container, 40FT container, 40FT high container, open-top container, flat bed container, Ro-Ro ship or bulk ship according to the size the products.
