English
| Quantity: | |
|---|---|
The CAMC 4 × 2 electric terminal tractor adopts a 4 × 2 drive layout and is a pure electric equipment specially designed for short distance cargo transfer in ports and terminals. With the core characteristics of "battery exchange energy supplementation+high load capacity+low noise", it is widely used in high-frequency operation scenarios such as port container transportation and yard material connection. With its comprehensive advantages of high efficiency, environmental protection, flexibility, and reliability, it adapts to the 24-hour continuous operation needs of ports and has become the preferred equipment for port green transformation. The car is equipped with a permanent magnet synchronous motor with a rated power of 220kW and a peak power of 360kW, paired with a 4-speed AMT gearbox. The peak torque reaches 2100Nm, and the power output is strong and stable; Equipped with a 600kWh CATL lithium iron phosphate battery, the rated load can achieve a range of 160-250km, supporting 3-5 minutes of fast battery swapping and 1-hour fast charging, significantly reducing downtime for energy replenishment and perfectly adapting to the high-frequency operation rhythm of ports. The overall dimensions of the vehicle are 6170 × 2550 × 3450mm, with a curb weight of 9500kg and a rated total traction mass of 42000kg. It can reach 75 tons under overload conditions and has outstanding load-bearing capacity; With a wheelbase of 3800mm and a front and rear turning radius of 1800/1600mm, the steering is flexible and can easily adapt to narrow working spaces in ports. The maximum speed is 40km/h, the maximum climbing ability is 20%, and the acceleration time from 0-50km/h is 20 seconds. Combined with an all air braking system and optional dual source steering, the operation is stable and can handle complex road conditions in ports with ease. At the same time, the offset cab design enhances driving visibility, reduces operational blind spots, and meets the environmental requirements of ports with zero emissions and low noise (operating noise ≤ 65dB). The energy consumption cost is only one-third of that of fuel vehicles, and the 5-year full cycle operating cost is reduced by more than 25%. Taking into account both environmental protection and economy, it provides efficient, low-cost, and safe green solutions for short distance transportation in ports, which is in line with the global trend of port electrification transformation.
| Type | Battery replacement type of dock tractor |
| Model | HN4180D20C8BEV |
| Driving model | 4×2 |
| Wheelbase (mm) | 3800 |
| Overall dimension (mm) | 6170×2550×3450 |
| Kerb weight (Kg) | 9500 |
| GVW (kg) | 42000 (Overload:75T) |
| Front/Rear radius of gyration (mm) | 1800/1600 |
| Ratio of driving axle | 16T（Optional:13T）/ Ratio:11.98 |
| Motor type | Permanent magnet synchronous moto |
| Motor rated/peak power (kW) | 220/360 |
| Motor rated/peak power (N.m) | 1500/2100 |
| Gearbox | 4shift, AMT |
| Power Battery | Lithium iron phosphate(CATL) |
| Power Battery specs | 618.24 V，281.92 kWh，141 kWh |
| 0~50km/h Acceleration time (s) | 20 |
| Maximum speed (km/h) | 40 |
| Maximum climbing grade (%) | 20 |
| Driving range under standard load combined condition (km) | 80~130 |
| Power on mode（charging/battery replacement | DC dual guns/battery replacement |
| Charging/battery replacement time | Charging 1h, Battery replacement＜6min |
1. Efficient energy replenishment, suitable for high-frequency operations: Equipped with a 600kWh CATL lithium iron phosphate battery, it supports 3-5 minutes of fast battery swapping and 1-hour fast charging, greatly reducing downtime. With a range of 160-250km, it perfectly adapts to the 24-hour continuous operation and high-frequency transportation needs of ports, improving operational turnover efficiency.
2. Strong power and outstanding load: Equipped with a 220kW/360kW permanent magnet synchronous motor and a 4-speed AMT gearbox, it has a peak torque of 2100Nm, a rated traction mass of 42000kg, and an overload of up to 75 tons, making it easy to meet the heavy load transfer needs of ports. The power output is stable and reliable.
3. Flexible and convenient, strong adaptability: With a wheelbase of 3800mm and a front and rear turning radius of 1800/1600mm, the steering is flexible and suitable for narrow working spaces in ports. It features full air braking and optional dual source steering, ensuring stable operation and easy handling of complex road conditions.
4. Environmental friendly economy, significant cost reduction: zero emissions, low noise (≤ 65dB), in line with port environmental protection requirements; Energy consumption is only one-third of that of gasoline vehicles, and the 5-year full cycle operating cost is reduced by more than 25%, balancing environmental protection and economy.
1. The person in charge of operating a port in Europe: “Our port specializes in high-frequency short distance transportation. The fast battery swapping mode of CAMC electric tractor is very practical. It can be recharged in 3-5 minutes without long downtime waiting. The 75 ton traction capacity can fully meet our heavy-duty needs, and it has low noise and energy consumption. Long term use can save a lot of costs, which is completely in line with our green operation concept.”
The purchasing manager of a container terminal in Southeast Asia said, “This tractor has flexible steering and operates smoothly in narrow spaces at the port. Its zero emissions and low noise characteristics also meet our local environmental requirements. The range and energy replenishment efficiency can fully match our 24-hour operation needs. After long-term use, the operating cost is much lower than that of fuel vehicles, and it is highly recommended.”
CAMC International Trade Co., Ltd. is a core subsidiary of China National Machinery Industry Corporation (ChemChina) that focuses on overseas markets. Leveraging the strong industrial resources of its parent company, CAMC is committed to global promotion and technical services for heavy-duty and specialized vehicles. As a national key R&D and production base for heavy-duty vehicles and components, the company has industry-leading technological strength and manufacturing capabilities. Its products cover multiple fields such as tractor, dump truck, and specialized vehicle, and are widely used in logistics, engineering, and special transportation markets.
The company is headquartered in Huashan District, Ma'anshan City, Anhui Province. With a complete supply chain system and international strategic layout, its products are exported to Southeast Asia, the Middle East, Africa, Latin America and other regions. As a key supported enterprise by national policies, CAMC always adheres to the principle of technological innovation and quality priority, providing high reliability and cost-effective transportation solutions for global customers, and continuously enhancing the competitiveness of Chinese manufacturing in the international market.
Q: How do you control the quality of product?
A: Our facility operates a standardized production space and holds certifications like ISO, CCC, and BV. All staff are professionally trained, and every single product unit goes through a strict multi-step inspection before leaving the factory.
Q: What are the advantages of the new product？
A: It offers flexible system setups that balance weight, cost, and fuel efficiency perfectly. Plus, it integrates the engine with the generator directly, which boosts operational efficiency significantly.
Q: What are the smart features of this new product？
A: It includes blind-spot monitoring, driver behavior analysis, and connected-vehicle cloud services. Additional smart functions cover one-click activation of dust-suppression systems, real-time cargo tracking, remote automated replenishment, cylinder health checks, and monitoring of mileage, fuel use, and location.
Q: What's new about the new product?
A: It fully meets quality standards, resolving registration-related issues. Its dimensions and official declaration photos are fully compliant with regulatory requirements.
Q: How about your product after-sales service system?
A: We have dedicated after-sales support in most of our key export markets; for other regions, we partner with third-party service providers to ensure coverage.
Q: Why choose you?
A: Our brand has built a solid reputation over decades. We’re equipped with top-tier domestic technology, and our meticulous team ensures each product meets high-quality benchmarks—paired with reliable after-sales support.
Q: Do you accept custom order? What's is your MOQ order?
A: Customized orders are available, and our minimum order quantity is just 1 unit.
Q: What's the payment terms?
A: We accept telegraphic transfers (T/T) or sight letters of credit (L/C) as payment methods.
