English
| Quantity: | |
|---|---|
Product Introduction
CAMC H7 6 × 4 electric tractor is a new generation of zero emission solution specially built for medium and long distance logistics and port transportation. The vehicle adopts high-efficiency electric drive system and is equipped with large-capacity lithium iron phosphate battery pack. The endurance mileage for single charge can reach 350km. It supports double-gun fast charge (80% charge for 30 minutes), perfectly meeting the demand of high-strength transportation.
Essential Details
| Drive Wheel | 6×4 |
| Seats | ≤5 |
| Horsepower | 360kw |
| Engine Capacity | 282kwh |
| Tire Certification | ECE, GCC, ISO, DOT, ECE, GCC, ISO |
| Tire Design | Radial |
| Condition | |
| Battery brand | CATL |
| Voltage and capacity | 618.24V, 456Ah |
| Battery power | 282kwh |
| Battery type | Lithium iron phosphate |
| Motor rated/peak torque(N.m) | 1500/2100 |
| Comprehensive driving range (km) | 150~170 |
| Charging time | 1.5h |
| Gearbox | 9 speed AMT with PTO |
| Kerb weight(kg) | |
| Wheelbase(mm) | 3800+1350 |
| Transport Package | Standard Export |
| Specification | 7390x2550x3835mm |
| Trademark | CAMC |
| Origin | China |
| Production Capacity | 11月21日 |
Product Highlights
Powerful power: Three-motor drive system provides peak torque of 3600N · m, and acceleration performance of 0-80km/h is superior to that of diesel vehicles of the same level
Intelligent electric control: BMS energy management system independently developed, realizing energy consumption optimization of more than 15%
Ultimate safety: The battery pack is IP69K certified and equipped with a three-level thermal runaway protection system
Economy and efficiency: the operation cost of the whole life cycle is 40% lower than that of the diesel vehicle, and the differential investment can be recovered in 2 years
Excellent Buyer Reviews
Logistic Manager Hamburg, Germany
“Our CAMC H7 6 × 4 electric tractor performs admirably in port container transfer! There is still 25% of remaining power after 45 times of transportation per day, and the torque of 3600N · m makes the full-load starting faster than the diesel vehicle. The most surprising is 70% reduction in noise and full compliance with EU environmental standards at night.”
Operational Director, Southeast Asia Logistics
“In the cross-border traffic between Singapore and Malaysia, the 350 km of H7 can fully meet the daily demand of trunk line. Double-gun quick-charge technology only takes 30 minutes to power up in the afternoon, saving $45000 in energy cost compared to the diesel fleet per month. The battery is stable in the high humidity environment of tropical rainy season, and the attendance rate is up to 99%.”
Our Company
CAMC International is a leading enterprise in China's heavy vehicle manufacturing industry. As a key national supported research and development production base for heavy vehicles and components, the company has maintained a leading position in the industry since its establishment in the 1970s. With a complete layout of the entire industry chain, CAMC has become the only truck manufacturer in China with the ability to independently produce core components such as engines, transmissions, axles, chassis, and cab, achieving full process autonomy and controllability from key components to the entire vehicle.
The company relies on the research and development strength of the national enterprise technology center, and its products cover a full range of commercial vehicles such as heavy-duty trucks, engineering dump trucks, and special transport vehicles, which are widely used in key areas of the national economy such as infrastructure, mining, and logistics. Through continuous technological innovation and intelligent manufacturing upgrading, CAMC not only maintains a leading position in the domestic market, but also sells its products to more than 80 countries and regions around the world, especially in the markets along the "the Belt and Road". As a representative enterprise of high-end equipment manufacturing in China, the company is actively promoting the application of new energy and intelligent technology in the commercial vehicle field, leading the industry to transform and upgrade towards green and low-carbon direction.
FAQ
Q: How many engines can your factory produce annually?
A: Hello, we can produce nearly 100000 units annually. Nearly 8500 units per month.
Q: Do you accept custom order? What's is your MOQ order?
A:Yes, we do. Our MOQ is 1 unit.
Q: Do you have ISO certification?
A: Yes, we have ISO, CCC, BV certifications. Please contact us to obtain the certificate.
Q:How to choose the right model?
A:It depends on continuous output power, Voltage, Frequency and fuel type.
Q:How is the after sale service and maintenance ?
A : We offer installation, repair and maintain service abroad. And online quide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
Q: How do you control the quality of the product?
A: Our factory has standard production workshops and our workers are well-trained. Every product undergoes a rigorous inspection process.
Q: How about your product after-sales service system?
A:Our main export countries have accepted after-sales service, some countries use the third party service.
Q: What's the payment terms?
A:By T/T or L/C at sight.
Q: How about shipment?
A:20FT container, 40FT container, 40FT high container, open-top container, flat bed container, Ro-Ro ship or bulk ship according to the size the products.
Q:Which country do you have exported to?
A:We have exported to More than 60 countries and regions in Eastern Europe, North Africa, Southeast As
Product Introduction
CAMC H7 6 × 4 electric tractor is a new generation of zero emission solution specially built for medium and long distance logistics and port transportation. The vehicle adopts high-efficiency electric drive system and is equipped with large-capacity lithium iron phosphate battery pack. The endurance mileage for single charge can reach 350km. It supports double-gun fast charge (80% charge for 30 minutes), perfectly meeting the demand of high-strength transportation.
Essential Details
| Drive Wheel | 6×4 |
| Seats | ≤5 |
| Horsepower | 360kw |
| Engine Capacity | 282kwh |
| Tire Certification | ECE, GCC, ISO, DOT, ECE, GCC, ISO |
| Tire Design | Radial |
| Condition | |
| Battery brand | CATL |
| Voltage and capacity | 618.24V, 456Ah |
| Battery power | 282kwh |
| Battery type | Lithium iron phosphate |
| Motor rated/peak torque(N.m) | 1500/2100 |
| Comprehensive driving range (km) | 150~170 |
| Charging time | 1.5h |
| Gearbox | 9 speed AMT with PTO |
| Kerb weight(kg) | |
| Wheelbase(mm) | 3800+1350 |
| Transport Package | Standard Export |
| Specification | 7390x2550x3835mm |
| Trademark | CAMC |
| Origin | China |
| Production Capacity | 11月21日 |
Product Highlights
Powerful power: Three-motor drive system provides peak torque of 3600N · m, and acceleration performance of 0-80km/h is superior to that of diesel vehicles of the same level
Intelligent electric control: BMS energy management system independently developed, realizing energy consumption optimization of more than 15%
Ultimate safety: The battery pack is IP69K certified and equipped with a three-level thermal runaway protection system
Economy and efficiency: the operation cost of the whole life cycle is 40% lower than that of the diesel vehicle, and the differential investment can be recovered in 2 years
Excellent Buyer Reviews
Logistic Manager Hamburg, Germany
“Our CAMC H7 6 × 4 electric tractor performs admirably in port container transfer! There is still 25% of remaining power after 45 times of transportation per day, and the torque of 3600N · m makes the full-load starting faster than the diesel vehicle. The most surprising is 70% reduction in noise and full compliance with EU environmental standards at night.”
Operational Director, Southeast Asia Logistics
“In the cross-border traffic between Singapore and Malaysia, the 350 km of H7 can fully meet the daily demand of trunk line. Double-gun quick-charge technology only takes 30 minutes to power up in the afternoon, saving $45000 in energy cost compared to the diesel fleet per month. The battery is stable in the high humidity environment of tropical rainy season, and the attendance rate is up to 99%.”
Our Company
CAMC International is a leading enterprise in China's heavy vehicle manufacturing industry. As a key national supported research and development production base for heavy vehicles and components, the company has maintained a leading position in the industry since its establishment in the 1970s. With a complete layout of the entire industry chain, CAMC has become the only truck manufacturer in China with the ability to independently produce core components such as engines, transmissions, axles, chassis, and cab, achieving full process autonomy and controllability from key components to the entire vehicle.
The company relies on the research and development strength of the national enterprise technology center, and its products cover a full range of commercial vehicles such as heavy-duty trucks, engineering dump trucks, and special transport vehicles, which are widely used in key areas of the national economy such as infrastructure, mining, and logistics. Through continuous technological innovation and intelligent manufacturing upgrading, CAMC not only maintains a leading position in the domestic market, but also sells its products to more than 80 countries and regions around the world, especially in the markets along the "the Belt and Road". As a representative enterprise of high-end equipment manufacturing in China, the company is actively promoting the application of new energy and intelligent technology in the commercial vehicle field, leading the industry to transform and upgrade towards green and low-carbon direction.
FAQ
Q: How many engines can your factory produce annually?
A: Hello, we can produce nearly 100000 units annually. Nearly 8500 units per month.
Q: Do you accept custom order? What's is your MOQ order?
A:Yes, we do. Our MOQ is 1 unit.
Q: Do you have ISO certification?
A: Yes, we have ISO, CCC, BV certifications. Please contact us to obtain the certificate.
Q:How to choose the right model?
A:It depends on continuous output power, Voltage, Frequency and fuel type.
Q:How is the after sale service and maintenance ?
A : We offer installation, repair and maintain service abroad. And online quide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
Q: How do you control the quality of the product?
A: Our factory has standard production workshops and our workers are well-trained. Every product undergoes a rigorous inspection process.
Q: How about your product after-sales service system?
A:Our main export countries have accepted after-sales service, some countries use the third party service.
Q: What's the payment terms?
A:By T/T or L/C at sight.
Q: How about shipment?
A:20FT container, 40FT container, 40FT high container, open-top container, flat bed container, Ro-Ro ship or bulk ship according to the size the products.
Q:Which country do you have exported to?
A:We have exported to More than 60 countries and regions in Eastern Europe, North Africa, Southeast As
