English
| Quantity: | |
|---|---|
CAMC
The CAMC M100 methanol engine is an efficient and clean power solution developed by Valin Automotive for heavy-duty industrial scenarios. Based on mature methanol power technology accumulation, it is specially developed for harsh working conditions such as engineering machinery, power generation equipment, and marine auxiliary equipment, taking into account the four core values of strong power, low energy consumption, high reliability, and low emissions.
Core power: High displacement and strong output, stable under heavy load conditions like a rock
Adopting the classic layout of 4-cylinder blue series, equipped with a 13.67L large displacement core body, the maximum power is 375kW (510 horsepower), the peak torque is 2500N · m, the low-speed torque is abundant, and the power response is rapid. Covering the high-intensity continuous operation requirements of industrial equipment under all working conditions, facing scenarios such as heavy load start-up, frequent start stop, and long-term full load operation, the power output is always strong and stable, fearless of extreme working conditions challenges.
Economic efficiency: 15% more fuel-efficient than diesel, reducing costs throughout the entire lifecycle
Compared with traditional diesel engines of the same power, the comprehensive fuel consumption is reduced by 15%, and the cost advantage of methanol fuel is significant, greatly reducing industrial operating fuel consumption expenses. The whole machine adopts a high durability design, and key components have been strengthened and verified to adapt to 7 × 24-hour long-term continuous operation, effectively reducing downtime maintenance frequency and operation and maintenance costs, and creating higher economic benefits for industrial users.
Technological breakthrough: methanol specific combustion system with dual advantages of performance and environmental protection
Innovative high tumble combustion chamber+high-energy ignition+intake boost intercooling technology, combined with theoretical air-fuel ratio closed-loop control+multi-point fuel injection strategy, accurately solves the pain points of low calorific value and high latent heat of vaporization of methanol, maximizing fuel utilization. Emissions meet Euro III and National III standards, with significantly reduced CO, HC, and NOx emissions and almost no particulate matter. It is compatible with environmental compliance requirements in most regions around the world and helps upgrade green industries.
Flexible adaptation: compact structure, easy to install, versatile for multiple scenarios
Adopting a highly integrated and compact design, it has small volume, light weight, low installation space requirements, and strong adaptability. It can be widely matched with various industrial equipment such as construction machinery (excavators/loaders/mining trucks), fixed generator sets, and ship auxiliary equipment, providing reliable, clean, and economical core power support for different scenarios. It is an ideal diesel alternative power in the heavy-duty industrial field.
| Engine model | GS13PM series |
| Engine arrangement type | In-line, four-stroke, liquid-cooled, supercharged intercooled |
| Type of fuel | M100 Methanol |
| Cylinder | 6 |
| Cylinder Bore x Stroke（mm） | 133*164 |
| Compression ratio | 12.5：1 |
| Engine displacement(L) | 13.67 |
Maximum power/Maximum speed | 375/1800 |
| Maximum torque/Maximum speed | 2500/950-1400 |
| Electronic control system | Multi-point jet electronic control system |
| Idle speed(r/min) | 600±50 |
| Minimum fuel consumption rate | ≤420（g/KWh） |
| the life of the B10 engines（km） | 1 million |
Strong and stable power: adopting a 4-cylinder blue series architecture and a 13.67L large displacement design, with a maximum power of 375kW and a peak torque of 2500N · m, the power output is abundant and stable, easily meeting the high-intensity continuous operation needs of various industrial equipment.
Outstanding energy-saving and cost reduction: Compared with traditional diesel engines, the comprehensive energy consumption is reduced by 15%, and the fuel usage cost is lower; The whole machine has excellent durability and is suitable for long-term full load operation, effectively reducing maintenance frequency and later operation and maintenance expenses.
Exclusive combustion technology: Equipped with an innovative combustion system, it specifically solves the industry problem of low calorific value and high latent heat of vaporization of methanol fuel, greatly improving fuel utilization efficiency and power performance comparable to traditional fuel power.
Environmental compliance is universal: exhaust emissions meet Euro III and National III standards, are clean and low polluting, and can meet the environmental access requirements of most countries and regions around the world, adapting to the development trend of green industry.
Wide installation adaptability: The overall structure is compact, the volume is small, the layout is simple and easy to install and debug, and it can flexibly match various industrial equipment such as construction machinery and power generation equipment, with rich application scenarios.
1．Southeast Asian engineering equipment service provider: “We have purchased this methanol engine in bulk to support the use of engineering machinery and equipment. The power performance fully meets expectations and the long-term operation is stable. The energy consumption is much lower than diesel models, daily maintenance is simple, and emissions comply with local environmental laws and regulations. The comprehensive cost advantage of use is very obvious. ”
2．Middle East generator operator: “The CAMC M100 methanol engine has a compact structure and is easy to install, making it very suitable for use with our power generation equipment. Exclusive combustion technology enables high fuel utilization efficiency, low operational failure rate, and reliable performance under continuous working conditions, making it a cost-effective clean power choice. ”
CAMC International is a global foreign trade brand and professional export platform under the umbrella of Hualing Xingma (CAMC). With over 50 years of manufacturing experience and full industry chain research and development production capabilities, the group focuses on overseas sales, project customization, and comprehensive services of commercial vehicles, marine power, industrial air compressors, and core components. It is one of the core enterprises in domestic equipment manufacturing going global.
The company is located in the Ma'anshan Intelligent Manufacturing Base in Anhui Province, with a national level technology research and development center, modern production plant area, and strict quality control system. Enterprises can achieve independent research and mass production of core components such as engines, transmissions, and axles, and build a complete industrial chain advantage. Our main products cover a full range of diesel and new energy tractor trucks, dump trucks, concrete mixer trucks, and other engineering and logistics commercial vehicles; GS series marine engine system, suitable for various inland and offshore ship power needs; And industrial supporting equipment such as BDW-FUDA non lubricated swing air compressor. All products in the series have stable performance and strong adaptability to working conditions, which can meet various scenarios such as logistics transportation, infrastructure mining, shipping operations, and industrial conveying.
All products have passed multiple international authoritative certifications, complying with emission, safety, and industry standards in different countries and regions, and supporting customized configuration modifications. At present, CAMC's international marketing and service network covers more than 60 countries and regions around the world, including Asia, Africa, the Middle East, Latin America, and Eastern Europe. It has established a complete overseas distribution system, local parts warehouses, and professional after-sales teams. We can provide customers with one-stop full process services including solution design, vehicle/equipment customization, logistics delivery, installation and commissioning, maintenance and repair, and spare parts supply.
Adhering to the business philosophy of "quality builds brand, service wins trust", CAMC International deeply cultivates the global market, continuously promotes technological upgrades and product iterations, and synchronously lays out the fields of clean energy and new energy equipment. In the future, we will continue to deepen our global partnership and strive to build an internationally renowned equipment brand with cost-effective Chinese intelligent products and professional and efficient global services. We will work hand in hand with customers at home and abroad for mutual benefit and win-win results.
Q1: What are the core specifications of the CAMC M100 methanol engine?
A: It’s a 6-cylinder, 4-stroke, turbocharged & intercooled methanol engine.
Displacement: 12.8 L / 13.67 L
Rated power: 375 kW @ 1800 rpm
Max torque: 2500 N·m @ 950–1400 rpm
Fuel: M100 pure methanol (≥99.5% purity)
B10 life: 1,000,000 kmCAMC Truck
Q2: What are the key advantages of using M100 methanol?
A:
Ultra-low emissions: Near-zero PM, low CO/HC/NOₓ; meets China Off-road Stage IV and IMO Tier II.
Cost-effective: Lower fuel cost than diesel in most regions.
High efficiency: High octane rating (RON ~111) allows higher compression ratio for better thermal efficiency.
Renewable potential: Can use green methanol for carbon-neutral operation.
Q3: Is the engine compatible with regular diesel fuel?
A: No. It is dedicated for M100 pure methanol only. Methanol is corrosive to standard diesel components; the engine uses methanol-resistant materials for fuel injectors, seals, and fuel lines. Do not mix with diesel or gasoline.
Q4: How does it perform in cold climates?
A: Equipped with a methanol-specific cold-start system enabling reliable start-up at -10°C without auxiliary heaters. For colder regions (below -10°C), an optional intake air heater is available.
Q5: What applications is the M100 engine suitable for?
A:
Marine: Main propulsion for cargo ships, fishing boats, workboatsCAMC Truck.
Off-road: Mining dump trucks, construction machinery.
Power generation: Generator sets for remote areas, islands, and backup power.
Q6: What is the warranty and after-sales support?
A: 2 years or 5,000 operating hours (whichever comes first). We provide:
Global spare parts supply.
24/7 online technical support.
On-site commissioning and training on request.
