English
| Quantity: | |
|---|---|
Product Introduction
As the flagship construction transport vehicle of the CAMC brand, the 6 × 4 dump truck, with its striking orange appearance and excellent engineering performance, has become an ideal choice for short distance transportation of silt, sand, gravel, and building materials. Specially designed for high-intensity work environments, it integrates mature chassis technology, strong power, and high load-bearing capacity, providing cost-effective and reliable equipment for infrastructure construction and construction site transportation.
The CAMC 6 × 4 dump truck, with its solid engineering genes and practical configuration, has become the preferred choice for upgrading construction fleets. Its "high load, low cost" characteristics are particularly suitable for the rapidly advancing infrastructure project needs of developing countries.fatigue and improving the safety and comfort of long-distance transportation.
Product Highlights
Professional short distance transportation design
To optimize the transportation demand for building materials, a large capacity rear dumping cargo compartment (standard volume 18-22m ³) is combined with a hydraulic self dumping system to achieve rapid loading and unloading, significantly improving the turnover efficiency of loose materials such as sand, gravel, and slag. Reinforced cargo compartment panels and anti-corrosion coatings ensure long-term durability and adaptability to various harsh working conditions.
Reliable power and load balance
Equipped with a high torque engine and optimized transmission system, peak power can be output at low speeds, perfectly matching the frequent start stop operation characteristics of construction sites. The 6 × 4 drive system, combined with multi-stage steel plate spring suspension, ensures traction and stability under heavy loads, with a one-way carrying capacity of over 30 tons.
Economy and Service Guarantee
The factory direct supply mode in 2026 ensures that vehicles are delivered in optimal condition and reduces intermediate costs. Modular design reduces maintenance complexity, and key components such as hydraulic pumps and bearings adopt long-life design, effectively reducing full cycle operating expenses.
Operation Guide
1.Pre-Start Inspection：Carefully check whether the tire pressure meets the standard, whether the hydraulic oil level is within the standard range, and confirm that the cargo bed is fully reset without deviation.
2.Driving Precautions：Strictly prohibit overloading. Be sure to slow down when turning or driving on ramps, and keep a safe distance from the vehicle in front.
3.Unloading Operation Process：Park on a flat and solid ground, pull the handbrake tightly → unlock the cargo bed locking device → slowly operate the hydraulic lever to lift the cargo bed → reset the cargo bed after unloading and check again whether the locking state is firm.
4.Daily Maintenance Points：Clean the air filter regularly, inspect the tightness of the hydraulic system pipelines, and replace the engine oil in a timely manner according to the specified mileage.
Essential Details
| Departure Angle | 10°-15° |
Fuel Tank Material | Aluminium alloy |
| Wheel base | 1850+3370+1350mm |
| Tire | 12.00R20 Steel Wire Tyre |
| Middle and rear axle | 16 tons |
| Front bridge | 7.5 tons |
| Color | Red white blue yellow,other |
| Tire Number | 12 |
| Window | Automatic |
Multimedia System | Yes |
| Touch Screen | Yes |
| ABS | Yes |
| Rear Camera | 360° |
| Fuel Tank Capacity | 400-500L |
| Gross Vehicle Weight | 14000-100000 kg |
| Cargo Tank length | 5.3-6.2M |
| Dimensions (L x W x H) (mm) | 10080*2495*3600mm |
| Transmission Type | Manual |
Customer Reviews
1. Construction Site Manager - Indonesia
"We've been operating 15 CAMC 6×4 dump trucks at our Jakarta highway project for 8 months. The bright orange color actually improves worksite visibility and safety. What surprised us most was how well the hydraulic system handles our daily 200+ dumping cycles - no leaks or failures even in tropical rain conditions. The fuel consumption is 15% better than our previous trucks, and the factory-direct supply in 2026 gave us perfect condition vehicles with full warranty coverage."
2. Mining Contractor - South Africa
"In our limestone quarry operations, these trucks move 25 tons of material per load without strain. The reinforced cargo box shows almost no deformation after 10,000+ hours of rough loading. While the cabin could use better dust sealing, the powertrain reliability makes it our most cost-effective Chinese truck - we've achieved ROI in just 14 months. The local service center's 24-hour parts availability is a game-changer for our uptime requirements."
Company Profile
CAMC International is a leading enterprise in China's heavy-duty vehicle industry. As a national key R&D and production base for heavy-duty vehicles, specialized vehicles, and core components, the company has maintained a leading position in the industry since its establishment in the 1970s. As the only truck manufacturer in China with the ability to independently produce the entire industry chain including engines, transmissions, axles, chassis, and cab, CAMC has achieved complete autonomy and controllability from key components to the entire vehicle.
Relying on the research and development capabilities of national level technology centers, the company's products cover a full range of commercial vehicles such as heavy-duty trucks, engineering dump trucks, and special transport vehicles, which are widely used in infrastructure, mining, logistics, and other fields. With the advantage of a complete industrial chain and continuous technological innovation, CAMC not only occupies an important position in the domestic market, but also exports its products to more than 80 countries and regions around the world. As a high-end equipment manufacturing enterprise supported by national policies, the company is continuously promoting the upgrading and development of China's commercial vehicle industry towards intelligence and green direction.
Successful Project
FAQ
Q: How many engines can your factory produce annually?
A: Hello, we can produce nearly 100000 units annually. Nearly 8500 units per month.
Q: Do you accept custom order? What's is your MOQ order?
A:Yes, we do. Our MOQ is 1 unit.
Q: Do you have ISO certification?
A: Yes, we have ISO, CCC, BV certifications. Please contact us to obtain the certificate.
Q:How to choose the right model?
A:It depends on continuous output power, Voltage, Frequency and fuel type.
Q:How is the after sale service and maintenance ?
A : We offer installation, repair and maintain service abroad. And online quide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
Q: How do you control the quality of the product?
A: Our factory has standard production workshops and our workers are well-trained. Every product undergoes a rigorous inspection process.
Q: How about your product after-sales service system?
A:Our main export countries have accepted after-sales service, some countries use the third party service.
Q: What's the payment terms?
A:By T/T or L/C at sight.
Q: How about shipment?
A:20FT container, 40FT container, 40FT high container, open-top container, flat bed container, Ro-Ro ship or bulk ship according to the size the products.
Q:Which country do you have exported to?
A:We have exported to More than 60 countries and regions in Eastern Europe, North Africa, Southeast As
Product Introduction
As the flagship construction transport vehicle of the CAMC brand, the 6 × 4 dump truck, with its striking orange appearance and excellent engineering performance, has become an ideal choice for short distance transportation of silt, sand, gravel, and building materials. Specially designed for high-intensity work environments, it integrates mature chassis technology, strong power, and high load-bearing capacity, providing cost-effective and reliable equipment for infrastructure construction and construction site transportation.
The CAMC 6 × 4 dump truck, with its solid engineering genes and practical configuration, has become the preferred choice for upgrading construction fleets. Its "high load, low cost" characteristics are particularly suitable for the rapidly advancing infrastructure project needs of developing countries.fatigue and improving the safety and comfort of long-distance transportation.
Product Highlights
Professional short distance transportation design
To optimize the transportation demand for building materials, a large capacity rear dumping cargo compartment (standard volume 18-22m ³) is combined with a hydraulic self dumping system to achieve rapid loading and unloading, significantly improving the turnover efficiency of loose materials such as sand, gravel, and slag. Reinforced cargo compartment panels and anti-corrosion coatings ensure long-term durability and adaptability to various harsh working conditions.
Reliable power and load balance
Equipped with a high torque engine and optimized transmission system, peak power can be output at low speeds, perfectly matching the frequent start stop operation characteristics of construction sites. The 6 × 4 drive system, combined with multi-stage steel plate spring suspension, ensures traction and stability under heavy loads, with a one-way carrying capacity of over 30 tons.
Economy and Service Guarantee
The factory direct supply mode in 2026 ensures that vehicles are delivered in optimal condition and reduces intermediate costs. Modular design reduces maintenance complexity, and key components such as hydraulic pumps and bearings adopt long-life design, effectively reducing full cycle operating expenses.
Operation Guide
1.Pre-Start Inspection：Carefully check whether the tire pressure meets the standard, whether the hydraulic oil level is within the standard range, and confirm that the cargo bed is fully reset without deviation.
2.Driving Precautions：Strictly prohibit overloading. Be sure to slow down when turning or driving on ramps, and keep a safe distance from the vehicle in front.
3.Unloading Operation Process：Park on a flat and solid ground, pull the handbrake tightly → unlock the cargo bed locking device → slowly operate the hydraulic lever to lift the cargo bed → reset the cargo bed after unloading and check again whether the locking state is firm.
4.Daily Maintenance Points：Clean the air filter regularly, inspect the tightness of the hydraulic system pipelines, and replace the engine oil in a timely manner according to the specified mileage.
Essential Details
| Departure Angle | 10°-15° |
Fuel Tank Material | Aluminium alloy |
| Wheel base | 1850+3370+1350mm |
| Tire | 12.00R20 Steel Wire Tyre |
| Middle and rear axle | 16 tons |
| Front bridge | 7.5 tons |
| Color | Red white blue yellow,other |
| Tire Number | 12 |
| Window | Automatic |
Multimedia System | Yes |
| Touch Screen | Yes |
| ABS | Yes |
| Rear Camera | 360° |
| Fuel Tank Capacity | 400-500L |
| Gross Vehicle Weight | 14000-100000 kg |
| Cargo Tank length | 5.3-6.2M |
| Dimensions (L x W x H) (mm) | 10080*2495*3600mm |
| Transmission Type | Manual |
Customer Reviews
1. Construction Site Manager - Indonesia
"We've been operating 15 CAMC 6×4 dump trucks at our Jakarta highway project for 8 months. The bright orange color actually improves worksite visibility and safety. What surprised us most was how well the hydraulic system handles our daily 200+ dumping cycles - no leaks or failures even in tropical rain conditions. The fuel consumption is 15% better than our previous trucks, and the factory-direct supply in 2026 gave us perfect condition vehicles with full warranty coverage."
2. Mining Contractor - South Africa
"In our limestone quarry operations, these trucks move 25 tons of material per load without strain. The reinforced cargo box shows almost no deformation after 10,000+ hours of rough loading. While the cabin could use better dust sealing, the powertrain reliability makes it our most cost-effective Chinese truck - we've achieved ROI in just 14 months. The local service center's 24-hour parts availability is a game-changer for our uptime requirements."
Company Profile
CAMC International is a leading enterprise in China's heavy-duty vehicle industry. As a national key R&D and production base for heavy-duty vehicles, specialized vehicles, and core components, the company has maintained a leading position in the industry since its establishment in the 1970s. As the only truck manufacturer in China with the ability to independently produce the entire industry chain including engines, transmissions, axles, chassis, and cab, CAMC has achieved complete autonomy and controllability from key components to the entire vehicle.
Relying on the research and development capabilities of national level technology centers, the company's products cover a full range of commercial vehicles such as heavy-duty trucks, engineering dump trucks, and special transport vehicles, which are widely used in infrastructure, mining, logistics, and other fields. With the advantage of a complete industrial chain and continuous technological innovation, CAMC not only occupies an important position in the domestic market, but also exports its products to more than 80 countries and regions around the world. As a high-end equipment manufacturing enterprise supported by national policies, the company is continuously promoting the upgrading and development of China's commercial vehicle industry towards intelligence and green direction.
Successful Project
FAQ
Q: How many engines can your factory produce annually?
A: Hello, we can produce nearly 100000 units annually. Nearly 8500 units per month.
Q: Do you accept custom order? What's is your MOQ order?
A:Yes, we do. Our MOQ is 1 unit.
Q: Do you have ISO certification?
A: Yes, we have ISO, CCC, BV certifications. Please contact us to obtain the certificate.
Q:How to choose the right model?
A:It depends on continuous output power, Voltage, Frequency and fuel type.
Q:How is the after sale service and maintenance ?
A : We offer installation, repair and maintain service abroad. And online quide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
Q: How do you control the quality of the product?
A: Our factory has standard production workshops and our workers are well-trained. Every product undergoes a rigorous inspection process.
Q: How about your product after-sales service system?
A:Our main export countries have accepted after-sales service, some countries use the third party service.
Q: What's the payment terms?
A:By T/T or L/C at sight.
Q: How about shipment?
A:20FT container, 40FT container, 40FT high container, open-top container, flat bed container, Ro-Ro ship or bulk ship according to the size the products.
Q:Which country do you have exported to?
A:We have exported to More than 60 countries and regions in Eastern Europe, North Africa, Southeast As
