English
| Quantity: | |
|---|---|
Product Description
The FARIZON GS13M series engine is a clean energy power system designed specifically for off-road and special vehicles, using M100 methanol fuel technology, which combines high performance and environmental advantages. The engine optimizes combustion efficiency through an intake intercooler system and achieves precise fuel injection through theoretical air-fuel ratio closed-loop control, ensuring stable and efficient power output. The cooling EGR system effectively reduces nitrogen oxide emissions and meets strict environmental standards.
Its compact structural design is suitable for various complex working conditions, especially for high load off-road scenarios, and can operate reliably in environments ranging from -30 ℃ to 50 ℃. The GS13M series combines low-carbon emissions and strong power characteristics, making it an ideal power solution for the new energy off-road field.
Technical Parameters
| Engine model | GS06M series |
| Engine arrangement type | In-line, four-stroke, liquid-cooled, supercharged intercooled |
| Type of fuel | M100 Methanol |
| Cylinder | 4 |
| Cylinder Bore x Stroke（mm） | 112*150 |
| Compression ratio | 12.5：1 |
| Engine displacement(L) | 5.9 |
Maximum power/Maximum speed(r/min) | 180/2200 |
| Maximum torque(N·m） | 930 |
| Max torque/rotation speed(r/min) | 1300/1600 |
| Electronic control system | Multi-point jet electronic control system |
| Idle speed(r/min) | 600±50 |
| the life of the B10 engines（km） | 1 million |
Advantages of the Product
High perlormance: Adopting high compression ratio, high energy ignition, high rolling flow combustionchamber structure, as well as optimizing air duct and timing mechanism, adopting intake boost intercooling andother technologies to make combustion more efficient and power more powerful;
Low fuel consumption: Adopt theoretical air-fuel ratio closed-loop control, multi-point fuel injection and otheradvanced technologies to optimize combustion, so that the engine has more excellent fuel economy, low cost ofuse and high cost perforrmance;
High reliability: We insist on the development concept of high quality, and consider the technical route, CAE analysis and test verification from many aspects to make the product quality reliable.
Ultra-low emission: Methanol is a recognized clean energy source, cormpared with conventional fuels such asgasoline and diesel, methanol burns more fully and completely, and its ermissions of CO, HC and NOx drop significantly, and there are almost no particulate emissions. Meanwhile, with the application of cooling EGP system, the whole engine emission can reach the off-road national stage Ⅳ emission standard.
Customer Reviews
“This is a very good manufacturer. They provide very professional advice and offer competitive prices. I really like it and will continue to work with them in the future. Thank you.”
--From a German transportation company
“This is an excellent product at an affordable price. Their business is very professional and they are very helpful. I am looking forward to working with them again, thank you.”
--From Iraq Transport Company
Our Factory
CAMC is specialized in different kinds of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishmet of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with an irresistible force.
FAQ
Q:Do you have ISO certificate?
A:Yes, we have, please contact us to get our certificates.
Q:How about the lead time?
A:35 working days
Q:How do you control the quality of product?
A:Our Factory has standard production workshop,gets ISO CCC BV certifi-cates, our workers are well trained. Every unit of product undergoes a rigor-ous inspection process
Q:How about your product after-sales service system?
A:Our main export countries have accepted after-sales service, some coun-tries use the third party service.
Q:What's the payment terms?
A:By T/T or L/Cat sight,
Q:Which country do you have exported to?
A:We have exported to More than 60 countries and regions in Eastern Europe, Noth Africa, Southeast Asia and South America.
Product Description
The FARIZON GS13M series engine is a clean energy power system designed specifically for off-road and special vehicles, using M100 methanol fuel technology, which combines high performance and environmental advantages. The engine optimizes combustion efficiency through an intake intercooler system and achieves precise fuel injection through theoretical air-fuel ratio closed-loop control, ensuring stable and efficient power output. The cooling EGR system effectively reduces nitrogen oxide emissions and meets strict environmental standards.
Its compact structural design is suitable for various complex working conditions, especially for high load off-road scenarios, and can operate reliably in environments ranging from -30 ℃ to 50 ℃. The GS13M series combines low-carbon emissions and strong power characteristics, making it an ideal power solution for the new energy off-road field.
Technical Parameters
| Engine model | GS06M series |
| Engine arrangement type | In-line, four-stroke, liquid-cooled, supercharged intercooled |
| Type of fuel | M100 Methanol |
| Cylinder | 4 |
| Cylinder Bore x Stroke（mm） | 112*150 |
| Compression ratio | 12.5：1 |
| Engine displacement(L) | 5.9 |
Maximum power/Maximum speed(r/min) | 180/2200 |
| Maximum torque(N·m） | 930 |
| Max torque/rotation speed(r/min) | 1300/1600 |
| Electronic control system | Multi-point jet electronic control system |
| Idle speed(r/min) | 600±50 |
| the life of the B10 engines（km） | 1 million |
Advantages of the Product
High perlormance: Adopting high compression ratio, high energy ignition, high rolling flow combustionchamber structure, as well as optimizing air duct and timing mechanism, adopting intake boost intercooling andother technologies to make combustion more efficient and power more powerful;
Low fuel consumption: Adopt theoretical air-fuel ratio closed-loop control, multi-point fuel injection and otheradvanced technologies to optimize combustion, so that the engine has more excellent fuel economy, low cost ofuse and high cost perforrmance;
High reliability: We insist on the development concept of high quality, and consider the technical route, CAE analysis and test verification from many aspects to make the product quality reliable.
Ultra-low emission: Methanol is a recognized clean energy source, cormpared with conventional fuels such asgasoline and diesel, methanol burns more fully and completely, and its ermissions of CO, HC and NOx drop significantly, and there are almost no particulate emissions. Meanwhile, with the application of cooling EGP system, the whole engine emission can reach the off-road national stage Ⅳ emission standard.
Customer Reviews
“This is a very good manufacturer. They provide very professional advice and offer competitive prices. I really like it and will continue to work with them in the future. Thank you.”
--From a German transportation company
“This is an excellent product at an affordable price. Their business is very professional and they are very helpful. I am looking forward to working with them again, thank you.”
--From Iraq Transport Company
Our Factory
CAMC is specialized in different kinds of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishmet of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with an irresistible force.
FAQ
Q:Do you have ISO certificate?
A:Yes, we have, please contact us to get our certificates.
Q:How about the lead time?
A:35 working days
Q:How do you control the quality of product?
A:Our Factory has standard production workshop,gets ISO CCC BV certifi-cates, our workers are well trained. Every unit of product undergoes a rigor-ous inspection process
Q:How about your product after-sales service system?
A:Our main export countries have accepted after-sales service, some coun-tries use the third party service.
Q:What's the payment terms?
A:By T/T or L/Cat sight,
Q:Which country do you have exported to?
A:We have exported to More than 60 countries and regions in Eastern Europe, Noth Africa, Southeast Asia and South America.
